BALTECH HI-1650
The induction heater BALTECH HI-1650 is intended to heat bearings and parts weighing up to 210 kg. The induction heater has a heating temperature range 0-240°C. The rotatable yoke is easily input to the bearing hole. This has an electronic timer from 0 to 99 minutes for setting the heating time. The maximum power of the induction heater is 10 kVA. The heater has the function of automatic protection from overheating and function of automatic demagnetization. It weighs 51 kg and is intended to heat parts with a maximum outer diameter of 720 mm.
Technical Specifications
| Model | BALTECH HI-1650 |
|---|---|
| Electrics | |
| Nominal power , kVA | 10 |
| Voltage , V/Current,А | 380/25 |
| Frequency, Hz | 50 |
| Rotatable yoke | Yes |
| Heated part | |
| Maximum bearing weight, kg | 210 |
| Minimum inner diameter d, mm | 45 |
| Maximum outer diameter D, mm | 720 |
| W, mm | 200 |
| H, mm | 195 |
| Yoke dimensions | |
| Yoke width, mm | 30;40;50;65 |
| Yoke length, mm | 370 |
| Control panel | |
| Temperature setting, °С Maximum temperature, °С |
240 |
| Automatic power reduction | Yes |
| Dimensions | |
| Dimensions, mm | 470х440х330 |
| Heater weight (without yoke), kg | 51 |