Bearing Induction Heater HI-1604
The hot plate BALTECH HI-1604 is intended to perform heating of parts, rings, couplings and bearings before their mounting. The hot plate has a cover for safe and clean heating of parts. The cover also protects parts from damages. The heating temperature is set manually by the temperature regulator. This has a contact temperature sensor, operation manual and thermal-resistant gloves.
Technical Specifications
| Model | BALTECH HI-1604 (hot plate) |
|---|---|
| Electrics | |
| Nominal power, kVA | 1,32 |
| Voltage , V/Current,А | 220/6 |
| Frequency, Hz | 50 |
| Rotatable yoke | - |
| Heated part | |
| Maximum bearing weight, kg | - |
| Minimum inner diameter d, mm | - |
| Maximum outer diameter D, mm | - |
| W, mm | - |
| H, mm | - |
| Yoke dimensions | |
| Yoke width, mm | - |
| Yoke length, mm | - |
| Control panel | |
| Temperature setting, °С Maximum temperature, °С |
60-200 |
| Automatic power reduction | - |
| Dimensions | |
| Dimensions, mm | 400х220х145 |
| Heater weight (without yoke), kg | 8,3 |