Bearing Induction Heater HI-1630
BALTECH HI-1630 is a small- size, lightweight, high-performance and cost-effective induction heater with an electronic control. The induction heating can be conducted horizontally and vertically. The heater has the function of automatic demagnetization of bearings upon reaching a defined temperature. The induction heater is intended to heat parts weighting 25-55 kg with a maximum outer diameter 480 mm.
Technical Specifications
| Model | BALTECH HI-1630 |
|---|---|
| Electrics | |
| Nominal power , kVA | 3,6 |
| Voltage , V/Current,А | 220/16 |
| Frequency, Hz | 50 |
| Rotatable yoke | Yes |
| Heated part | |
| Maximum bearing weight, kg | 55 |
| Minimum inner diameter d, mm | 20 |
| Maximum outer diameter D, mm | 480 |
| W, mm | 120 |
| H, mm | 155 |
| Yoke dimensions | |
| Yoke width, mm | 14;20;30;45 |
| Yoke length, mm | 250 |
| Control panel | |
| Temperature setting, °С Maximum temperature, °С |
240 |
| Automatic power reduction | Yes |
| Dimensions | |
| Dimensions, mm | 470х210х260 |
| Heater weight (without yoke), kg | 25 |